my-fingerprint is a free, open source browsers & extensions project written in TypeScript and released under Apache-2.0. It has 1,501 GitHub stars, 193 forks and 6 open issues, and was last pushed 8 days ago. On this registry it ranks #120 of 152 tracked projects in Browsers & Extensions, with 5 head-to-head comparisons available.

What is my-fingerprint?

my-fingerprint is a lightweight, open-source browser extension, written in TypeScript for Chrome, Edge and Firefox, that disguises the fingerprinting signals websites use to identify and track visitors across sites.

What it is

my-fingerprint is a Manifest V3 browser extension written in TypeScript and released under the Apache-2.0 licence. It lives in the Chrome, Edge and Firefox extension ecosystem, ships bilingual Chinese and English documentation, and is distributed through the Edge Add-ons store and the Firefox Add-ons gallery, including Firefox for Android, with manual .zip and .xpi packages covering the remaining cases. The extension uses lightweight native injection with no dependencies, and its stated design goal is to work immediately after installation without additional configuration.

The problem it addresses is browser fingerprinting: the practice of combining signals such as canvas rendering, audio output, installed fonts, WebGL and WebGPU characteristics, screen geometry, and language and time zone into an identifier that websites can use for cross-site tracking. The project notes that a single fingerprint item is rarely unique on its own, but that several combined, particularly alongside IP address and browser storage, can identify a user with high confidence. my-fingerprint therefore spoofs key fingerprint values to break that tracking chain, and it can also monitor how pages access fingerprint APIs. In scope it stands in for a dedicated fingerprint browser, which simulates a complete environment; this project takes the lighter route of injecting script into the page instead.

Key capabilities

  • Spoofs Canvas, WebGL, Audio, Fonts, WebGPU, WebRTC and DomRect fingerprints, along with language and time zone, graphics driver information, UserAgent, and screen size and resolution.
  • Divides protection into a strong fingerprint group, which simulates highly unique user characteristics, and a weak group covering basic signals with high repetition rates.
  • Monitors page access to fingerprint APIs, so extension activity can be observed rather than assumed.
  • Supports whitelist rules with subdomain matching, where example.com also matches *.example.com and *.*.example.com.
  • Provides configuration import and export, plus a subscription mechanism that pulls a remote JSON template, either manually or automatically at extension startup; subscription settings override local settings and merge whitelist entries.
  • Offers a global seed for reproducible randomised values and a "quick injection" mode recommended for compatibility and performance.
  • Builds on Manifest V3 with zero dependencies, keeping performance overhead low.

Who uses it and how

  • Individuals on Chrome, Edge, Firefox or Firefox for Android who want everyday fingerprint protection without running a separate hardened browser.
  • People who verify the result themselves against established testing targets such as browserleaks.com, CreepJS, browserscan.net, webbrowsertools.com, yalala.com and uutool.cn.
  • Users who need per-site exceptions: a page that misbehaves under spoofing can be placed on the whitelist, or the "known issues" configuration preset applied.
  • Anyone keeping settings consistent across several installations, who can export a configuration or subscribe each browser to a remote JSON template that is re-applied at startup.
  • Developers and contributors who build the extension locally and file Issues or Pull Requests; the project also runs a QQ community group.

Getting started

Install from the Edge Add-ons store or the Firefox Add-ons gallery, which includes the Android build; Chrome users download the latest .zip release and drag it into the extension management page, with Chrome or Edge 102 or later required and 120 or later recommended, while Firefox users install the .xpi on Firefox 136 or later. Building from source takes npm install followed by npm run dev or npm run dev:firefox.

How it compares

The README positions my-fingerprint against fingerprint browsers as a category: a good fingerprint browser simulates a complete environment for deep disguise and suits anti-detection work, whereas this project relies on JavaScript injection, stays light, and covers most fingerprint-protection cases. The distinction drawn is between environment-level simulation and page-level modification, not between products on licence, hosting or cost.

When to use it — and when not to

There is nothing to operate server-side: it is a client-side extension with no database, storage or mail service to run. Anyone who needs full environment simulation for anti-detection should use a dedicated fingerprint browser instead, and users on Chrome must accept manual sideloading while no store listing exists. Over-spoofing is a genuine risk, since the project's own FAQ warns that masking more items than necessary can break page functionality or make behaviour look anomalous, and the README limits the project to learning and research purposes.

project readme (upstream, from github) — read inline

简体中文 | English


My Fingerprint


保护你的浏览器指纹,提升隐私安全。支持 Chrome、Edge、Firefox。

轻量、零干扰的浏览器扩展,基于 Manifest V3 构建。


Latest Release Stars Issues License

Edge Addon Firefox Addon Firefox for Android Addon Chrome Manual Install

微信赞赏支持作者   Support me on Ko-fi


✨ 功能 | 🧬 指纹 | 🧰 安装 | ⚙️ 配置 | 🧪 测试 | 🛠️ 开发 | ❓ 常见问题 | 🌱 社区 | 💝 支持 | 📜 声明 | 🙏 鸣谢

✨ 功能特点

  • 🚀 支持 Chrome、Edge、Firefox 浏览器
  • ⚙️ 安装即生效,无需额外配置
  • 📦 基于 Manifest V3,兼容性强
  • 🔍 可监控页面对指纹 API 的访问情况
  • 🧱 支持白名单控制与自定义配置
  • 📤 提供配置导入导出与订阅功能
  • 🧩 轻量级原生注入,零依赖,性能开销极低

🧬 指纹保护

  • Canvas 指纹
  • WebGL 指纹
  • Audio 指纹
  • Fonts 指纹
  • WebRTC 保护
  • WebGPU 指纹
  • DomRect 指纹
  • 语言与时区
  • 图形驱动信息
  • UserAgent
  • 屏幕尺寸与分辨率

🧰 安装指南

🧩 扩展商店安装

💡 扩展商店的更新可能因审核延迟而滞后于 GitHub。

📦 手动安装

Chrome / Edge
  • 浏览器版本要求:Chrome/Edge 102+
  • 推荐版本:120+
  • 下载扩展包 .zip 文件 → 拖入扩展管理页面 → 启用扩展
  • 可选:启用无痕模式支持
Firefox
  • 浏览器版本要求:Firefox 136+
  • 下载扩展包 .xpi 文件 → 拖入浏览器窗口 → 点击添加

⚙️ 配置模块

扩展支持灵活的配置选项,可通过图标进入设置面板进行调整:

  • 强指纹组

    • 模拟高度唯一的用户特征,通常与其他指纹项或 IP 信息联合使用
  • 弱指纹组

    • 获取重复率高的基础信息,适合轻度保护场景
  • 脚本配置

    • 全局种子:用于“根据全局种子随机值”选项,确保生成结果一致性
    • 注入模式:推荐启用“快速注入”以提升兼容性与性能
  • 白名单机制

    • 支持编辑白名单列表
    • 支持子域名匹配:如 example.com 可匹配 *.example.com、*.*.example.com
  • 订阅机制

    • 可使用配置模板进行初始化(订阅一次后可关闭)
    • 空值表示关闭订阅
    • 支持手动订阅或扩展启动时自动拉取远程配置(JSON 格式)
    • 订阅配置将覆盖原设置,并合并白名单内容

🧪 测试目标

🛠️ 开发

cd <project>
npm install
npm run dev          # Chrome / Edge
npm run dev:firefox  # Firefox

❓ 常见问题

Q: 某些页面扩展不生效或出现异常怎么办?

A: 可在脚本配置中启用“快速注入模式”以提升兼容性。若页面异常,可将其加入白名单,或尝试应用配置预设中的“已知问题列表”进行修复。

Q: 为什么需要这个扩展?

A: 浏览器指纹可被网站用于跨站追踪,影响隐私。这个扩展通过伪装关键指纹信息,降低被识别和跟踪的风险。

Q: 这个扩展和指纹浏览器有什么区别?

A: 一款优秀的指纹浏览器可以模拟完整环境实现深度伪装,更适合反检测场景;本扩展基于 JS 注入,轻量易用,兼容大部分指纹保护场景。

Q: 浏览器指纹是用户的唯一标识么?

A: 指纹本身不是绝对唯一,但多个指纹项组合后可高度识别用户,尤其与 IP、浏览器存储 等数据结合时。

Q: 配置保护的指纹越多越好么?

A: 不一定。多数情况下,仅修改一项关键指纹即可打断追踪链。过度伪装可能影响网页功能或暴露异常行为,建议按需选择保护项。

Q: 强指纹和弱指纹有什么区别?

A: 强指纹具有高度唯一性,修改后能显著提升隐私保护;弱指纹识别力较低,多数情况下无需修改,避免影响兼容性。

🌱 社区

  • 欢迎通过 Issues 和 Pull Requests 提交建议与反馈
  • QQ群

💝 支持一下

📜 声明

本项目仅用于学习与研究目的。请勿用于非法用途,开发者不对任何损失或问题负责。

🙏 鸣谢

感谢所有贡献者与支持者。特别感谢开源社区的力量!

Frequently asked questions

Is my-fingerprint free to use?

my-fingerprint is open source under the Apache-2.0 licence. There is no licence fee and no seat count — you can self-host it or, where the project offers one, pay a vendor for a managed version instead.

What does my-fingerprint do?

保护你的浏览器指纹 | Protect Your Browser Fingerprints | Chrome, Edge, Firefox | 扩展 / Extension

What is my-fingerprint written in?

my-fingerprint is primarily written in TypeScript. Its source is publicly available at https://github.com/omegaee/my-fingerprint, and it has 1,501 GitHub stars.